Delux Industrial Gases

Total discharge ATEX solenoid fire cylinder valves for CO₂ fire protection systems.

Advantages:

• ATEX-approved coil for potentially explosive environments
• Used as a pilot cylinder for a liquid-based fire extinguishing system or a smaller installation using a single cylinder
• Choice of 250 bar or 190 bar burst-disc pressures
• Other burst-disc pressures available upon request
• Special connections available upon request

Additional Information:

• Item Code: B0439

Pre-bored and fully assembled discharge nozzles — used in inert gas and CO2 total flooding fire protection systems. Key advantages:

• For faster and easier installation
• •Available in 4 thread sizes: ½”, ¾”, 1” and 1½”
• For use with inert gas and CO₂ fire suppression agents
• Special orifice diameters available upon request
• Maximum working pressure: 300 bar.
• Product Code:Series B0461
  

Specifications:

Total and intermittent discharge solenoid fire cylinder valves for CO₂ fire protection systems.

Advantages:

• Available in choice of Total Discharge or Intermittent Discharge
• Used as a pilot cylinder for a liquid-based fire extinguishing system or a smaller installation using a single cylinder
• Choice of 250 bar or 190 bar burst-disc pressures
• Other burst-disc pressures available on request
• For CO₂ total flooding gas fire suppression systems
• Product Code:B 0439

Specifications:

Fire cylinder valves + sensor tube assembly for CO₂ fire protection systems for use with DIMES digital measurement system.

Advantages:

• Improves productivity: No need to weigh cylinders
• Always know with certainty that your fire safety system cylinders are fully charged and ready
• Sensor tube is pre-cut to fit the cylinder length
• Choice of 4 standard lengths - custom lengths on request
• Compliant with CE norms - π marked

Specifications:

Additional Information:

• Item Code: B0480

Single-row manifolds to connect from 2 to 5 cylinders at maximum 100 bar pressure — used in total flooding fire protection systems.

Key advantages:

• For inert gas fire suppression systems
• For CO₂ fire suppression systems
• Single row configuration – for 2 to 5 cylinders
• Maximum 100 bar (test pressure 150 bar).
• Exceptional quality for dependable fire suppression performance when it counts
• Product Code:Series B0580
  

Specifications:

Single-row manifolds to connect from 2 to 5 cylinders at maximum 100 bar pressure — used in total flooding fire protection systems.

Key advantages:

• For inert gas fire suppression systems
• For CO₂ fire suppression systems
• Single row configuration – for 2 to 5 cylinders
• Maximum 100 bar (test pressure 150 bar).
• Exceptional quality for dependable fire suppression performance when it counts

Specifications:

Additional Information:

• Item Code: 0580

Optional pressure gauge to monitor discharge pressure that is mandatory when using directional valves — used in total flooding fire protection systems.

Key advantages:

• Filled with Glycerine
• Quality Class 1.6
• Gauge range: 0-400 bar
• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Product Code:0 28200231

Specifications:

Digital display and calibration device for DIMES digital measurement system – for fire suppression systems.

Advantages:

• Calibrates valve to cylinder and saves data via a built-in microchip
• Digital display can also be used to monitor system contents
• DIMES: always know with certainty that your fire safety system cylinders are fully charged and ready
• For CO₂ fire protection systems

Additional Information:

• Item Code: B07850200

End-of-line connector for DIMES multi-cable connectors – for fire suppression systems.

Advantages:

• 4-pin end connection
• Required with every Series 02990 cable for 2, 3 or 4 cylinders
• DIMES: always know with certainty that your fire safety system cylinders are fully charged and ready
• For CO₂ fire protection systems

Additional Information:

• Item Code: 029900083

Multi-cable to connect three B0480 DIMES valves to an alarm box – for fire suppression systems.

Advantages:

• 8-pin connection
• 500 mm length between cylinders
• DIMES: always know with certainty that your fire safety system cylinders are fully charged and ready
• For CO₂ fire protection systems
• Gas Type CO2

Additional Information:

• Item Code: 029900080

Cable to connect a single B0480 DIMES valve to an alarm box – for fire suppression systems.

Advantages:

• 8-pin connection for B0480 DIMES valve
• 2-meter cable length
• DIMES: always know with certainty that your fire safety system cylinders are fully charged and ready
• For CO₂ fire protection systems
• Gas Type CO2

Additional Information:

• Item Code: 029900088

Manual release device for B0480, B0481, B0482 — used in fixed installation fire systems. Key advantages:

• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Product Code:B 04420100
  

Specifications:

 

Bleed Valve - Used in Fixed Installation Fire Systems

To vent overpressure and prevent false fire safety system discharge in the event of a small pressure leak from the cylinders into the pneumatic actuators — used in fixed installation fire systems. Key advantages:

• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Product Code:0 29730040

Pressure-activated switch to send a signal when the system is discharging — used in fixed installation fire systems.

Key advantages:

• Actuated at 2 bar pressure
• Flexible voltage/amp power source
• Test pressure up to 300 bar
• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Product Code:02825 0050
  

 

Specifications:

Steel fitting to seal the end of a Firetec B0580 manifold — used in total flooding fire protection systems. Key advantages:

• Conforms to ISO 49 and EN 10242 standards
• Red dot confirms testing up to 300 bar
• 100 bar working pressure
• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Product Code:023400 100
  

Specifications:

Single-Piston Manual Pneumatic Release Device for B0480, B0481, B0483 — used in fixed installation fire systems.
Advantages:

• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Actuation Force: <150N / 20 bar

Specifications:

Additional Information:

• Item Code: B04420065

Hose to connect a master valve or pneumatic actuator with another pneumatic actuator — used in fixed installation fire systems. Key advantages:

• Both ends have a straight fitting
• 400 bar working pressure
• Available in 3 lengths: 400, 500, and 700 mm
• Requires an adapter on each end that must be ordered separately
• Exceptional quality for dependable fire suppression performance when it counts

Specifications:

Electromagnetic release device with blocking device — used in fixed installation fire systems.

Key advantages:

• Electrically actuates the release for fire extinguishing agents
• For use with Series B0480, B0481 and B0482 fire cylinder valves
• Exceptional quality for dependable fire suppression performance when it counts
• With blocking device to perform maintenance while under pressure
• VdS and LPCB-approved

Specifications:

Additional Information:

• Item Code: B-0442

Double-piston manual/pneumatic actuator for B0480, B0481 and B0482 fire cylinder valves — used in fixed installation fire systems

Key advantages:

• To actuate the release of fire extinguishing agents
• Double piston design for dependable fire suppression performance
• Manual or Pneumatic actuation
• <150N / 10 bar actuation force
• Actuation Force: <150N / 10 bar

Specifications:

Additional Information:

• Item Code: B04420116

Valve and actuator assembly to isolate separate fire protection zones from the same cylinder rack — used in total flooding fire protection systems. Key advantages:

• Isolates discharge only in the zone where there is a fire
• Includes valve + bracket + motor
• Available in carbon steel or stainless steel versions
• Choice of 5 diameters: 1”, 1.5”, 2”, 2.5” and 3”
• Actuates discharge either electronically or manually
• Product Code:Series B0551
  

Specifications:

Electromagnetic release device for series B0480, B0481, B0482 fire cylinder valves — used in fixed installation fire systems.

Advantages:

• Exceptional quality for dependable fire suppression performance when it counts
• Different versions available for VdS or UL-approved systems
• Long service life for cost-effective fire protection
• Available with and without LED
• Product Code:B 0442
  

Specifications:

Discharge nozzles where you drill the orifice to the required diameter and assemble it yourself — used in total flooding fire protection systems.
Key advantages:

• Easier to stock
• More economical alternative
• Available in 4 thread sizes: ½”, ¾”, 1” and 1½”
• Maximum working pressure: 300 bar
• Exceptional quality for dependable fire suppression performance when it counts

 

Specifications:

Additional Information:

• Item Code: B-0461

Steel fitting to connect two Firetec B0580 Manifolds — used in total flooding fire protection systems. Key advantages:

• Conforms to ISO 49 and EN 10242 standards
• Red Dot confirms test pressure up to 300 bar
• Working Pressure 100 bar
• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• Product Code:02 6300500
  

Specifications:

Double-piston pneumatic actuator for B0480, B0481 and B0482 fire cylinder valves — used in fixed installation fire systems. Key advantages:

• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• 10 bar actuation force

Specifications:

Additional Information:

• Item Code: B04420076

Single-piston pneumatic release device 20 BAR for B0480, B0481, B0482 — used in fixed installation fire systems.
Advantages:

• Exceptional quality for dependable fire suppression performance when it counts
• Long service life for cost-effective fire protection
• 20 bar actuation force

Specifications:

Additional Information:

• Item Code: B04420066